logo-unesco-whc
small-header
World Heritage
POLICY COMPENDIUM

RESULTS

Select source(s): 0

2 - Policies Regarding CREDIBILITY of the World Heritage List

2.2 - Outstanding Universal Value

2.2.6 - Boundaries and buffer zones

Paragraph 101

“For properties nominated under criteria (vii) - (x), boundaries should reflect the spatial requirements of habitats, species, processes or phenomena that provide the basis for their inscription on the World Heritage List. The boundaries should include sufficient areas immediately adjacent to the area of Outstanding Universal Value in order to protect the property's heritage values from direct effect of human encroachments and impacts of resource use outside of the nominated area.”

Theme:  2.2.6.1 - Boundaries
Source:  OG Operational Guidelines for the Implementation of the World Heritage Convention (WHC.19/01 - 10 July 2019)

2 - Policies Regarding CREDIBILITY of the World Heritage List

2.2 - Outstanding Universal Value

2.2.6 - Boundaries and buffer zones

Paragraph 102

“The boundaries of the nominated property may coincide with one or more existing or proposed protected areas, such as national parks or nature reserves, biosphere reserves or protected cultural or historic districts or other areas and territories. While such established areas for protection may contain several management zones, only some of those zones may satisfy requirements for inscription.”

Theme:  2.2.6.1 - Boundaries
Source:  OG Operational Guidelines for the Implementation of the World Heritage Convention (WHC.19/01 - 10 July 2019)

2 - Policies Regarding CREDIBILITY of the World Heritage List

2.2 - Outstanding Universal Value

2.2.6 - Boundaries and buffer zones

7. "[The World Heritage Committee] considers that modifications to boundaries of World Heritage properties that are related to mining activities should be considered through the procedure for significant modifications of boundaries, in accordance with paragraph 165 of the Operational Guidelines, given the potential impact of such projects on Outstanding Universal Value."
Theme:  2.2.6.1 - Boundaries
Decision:  35 COM 8B.46

2 - Policies Regarding CREDIBILITY of the World Heritage List

2.2 - Outstanding Universal Value

2.2.6 - Boundaries and buffer zones

Paragraph 103

“Wherever necessary for the proper protection of the property, an adequate buffer zone should be provided.”

Theme:  2.2.6.2 - Buffer Zones
Source:  OG Operational Guidelines for the Implementation of the World Heritage Convention (WHC.19/01 - 10 July 2019)

2 - Policies Regarding CREDIBILITY of the World Heritage List

2.2 - Outstanding Universal Value

2.2.6 - Boundaries and buffer zones

Paragraph 104

“For the purposes of effective protection of the nominated property, a buffer zone is an area surrounding the nominated property which has complementary legal and/or customary restrictions placed on its use and development to give an added layer of protection to the property. This should include the immediate setting of the nominated property, important views and other areas or attributes that are functionally important as a support to the property and its protection. The area constituting the buffer zone should be determined in each case through appropriate mechanisms. Details on the size, characteristics and authorized uses of a buffer zone, as well as a map indicating the precise boundaries of the property and its buffer zone, should be provided in the nomination.”

Theme:  2.2.6.2 - Buffer Zones
Source:  OG Operational Guidelines for the Implementation of the World Heritage Convention (WHC.19/01 - 10 July 2019)

2 - Policies Regarding CREDIBILITY of the World Heritage List

2.2 - Outstanding Universal Value

2.2.6 - Boundaries and buffer zones

Paragraph 105

“A clear explanation of how the buffer zone protects the property should also be provided.”

Theme:  2.2.6.2 - Buffer Zones
Source:  OG Operational Guidelines for the Implementation of the World Heritage Convention (WHC.19/01 - 10 July 2019)

2 - Policies Regarding CREDIBILITY of the World Heritage List

2.2 - Outstanding Universal Value

2.2.6 - Boundaries and buffer zones

Paragraph 106

“Where no buffer zone is proposed, the nomination should include a statement as to why a buffer zone is not required.”

Theme:  2.2.6.2 - Buffer Zones
Source:  OG Operational Guidelines for the Implementation of the World Heritage Convention (WHC.19/01 - 10 July 2019)

2 - Policies Regarding CREDIBILITY of the World Heritage List

2.2 - Outstanding Universal Value

2.2.6 - Boundaries and buffer zones

Paragraph 107

“Although buffer zones are not part of the nominated property, any modifications to or creation of buffer zones subsequent to inscription of a property on the World Heritage List should be approved by the World Heritage Committee using the procedure for a minor boundary modification (see paragraph 164 and Annex 11). The creation of buffer zones subsequent to inscription is normally considered to be a minor boundary modification.”

Theme:  2.2.6.2 - Buffer Zones
Source:  OG Operational Guidelines for the Implementation of the World Heritage Convention (WHC.19/01 - 10 July 2019)

2 - Policies Regarding CREDIBILITY of the World Heritage List

2.7 - Types of World Heritage properties

Paragraph 45

"Cultural and natural heritage are defined in Articles 1 and 2 of the World Heritage Convention.

Article 1

For the purposes of this Convention, the following shall be considered as "cultural heritage";

- monuments: architectural works, works of monumental sculpture and painting, elements or structures of an archaeological nature, inscriptions, cave dwellings and combinations of features, which are of Outstanding Universal Value from the point of view of history, art or science;

- groups of buildings: groups of separate or connected buildings which, because of their architecture, their homogeneity or their place in the landscape, are of Outstanding Universal Value from the point of view of history, art or science;

- sites: works of man or the combined works of nature and of man, and areas including archaeological sites which are of Outstanding Universal Value from the historical, aesthetic, ethnological or anthropological points of view.

Article 2

For the purposes of this Convention, the following shall be considered as "natural heritage":

- natural features consisting of physical and biological formations or groups of such formations, which are of Outstanding Universal Value from the aesthetic or scientific point of view;

geological and physiographical formations and precisely delineated areas which constitute the habitat of threatened species of animals and plants of Outstanding Universal Value from the point of view of science or conservation;

- natural sites or precisely delineated natural areas of Outstanding Universal Value from the point of view of science, conservation or natural beauty."

Theme:  2.7.1 - Cultural, Natural and Mixed Properties
Source:  OG Operational Guidelines for the Implementation of the World Heritage Convention (WHC.19/01 - 10 July 2019)

2 - Policies Regarding CREDIBILITY of the World Heritage List

2.7 - Types of World Heritage properties

Paragraph 46

“Properties shall be considered as "mixed cultural and natural heritage" if they satisfy a part or the whole of the definitions of both cultural and natural heritage laid out in Articles 1 and 2 of the Convention.

Theme:  2.7.1 - Cultural, Natural and Mixed Properties
Source:  OG Operational Guidelines for the Implementation of the World Heritage Convention (WHC.19/01 - 10 July 2019)

2 - Policies Regarding CREDIBILITY of the World Heritage List

2.7 - Types of World Heritage properties

4. "[The World Heritage Committee] reiterates that due to the complexity of mixed site nominations and their evaluation, States Parties should ideally seek prior advice from IUCN and ICOMOS, if possible at least two years before a potential nomination is submitted, in compliance with Paragraph 122 of the Operational Guidelines."
Theme:  2.7.1 - Cultural, Natural and Mixed Properties
Decision:  41 COM 9B

2 - Policies Regarding CREDIBILITY of the World Heritage List

2.7 - Types of World Heritage properties

Paragraph 134

“A nominated property may occur:

a) on the territory of a single State Party, or

b) on the territory of all concerned States Parties having adjacent borders (transboundary property).”

Theme:  2.7.2 - Transboundary and transnational properties
Source:  OG Operational Guidelines for the Implementation of the World Heritage Convention (WHC.19/01 - 10 July 2019)

2 - Policies Regarding CREDIBILITY of the World Heritage List

2.7 - Types of World Heritage properties

Paragraph 135

“Wherever possible, transboundary nominations should be prepared and submitted by States Parties jointly in conformity with Article 11.3 of the Convention. It is highly recommended that the States Parties concerned establish a joint management committee or similar body to oversee the management of the whole of a transboundary property.”

Theme:  2.7.2 - Transboundary and transnational properties
Source:  OG Operational Guidelines for the Implementation of the World Heritage Convention (WHC.19/01 - 10 July 2019)

2 - Policies Regarding CREDIBILITY of the World Heritage List

2.7 - Types of World Heritage properties

Paragraph 136

“Extensions to an existing World Heritage property located in one State Party may be proposed to become transboundary properties.”

Theme:  2.7.2 - Transboundary and transnational properties
Source:  OG Operational Guidelines for the Implementation of the World Heritage Convention (WHC.19/01 - 10 July 2019)

2 - Policies Regarding CREDIBILITY of the World Heritage List

2.7 - Types of World Heritage properties

 “II. TRANSBOUNDARY AND TRANSNATIONAL NOMINATIONS

6) [The World Heritage Committee] decides to consider as:

(a) transboundary nomination, only a property jointly nominated as such, in conformity with Article 11.3 of the Convention, by all concerned States Parties having adjacent borders;

(b) transnational nomination, a serial nomination of properties located in the territory of different States Parties, which need not be contiguous and which are nominated with the consent of all States Parties concerned”.

Theme:  2.7.2 - Transboundary and transnational properties
Decision:  7 EXT.COM 4A

2 - Policies Regarding CREDIBILITY of the World Heritage List

2.7 - Types of World Heritage properties

3. "[The World Heritage Committee] aware of the need to specify the submission modalities for the nomination of transboundary or transnational serial properties on the World Heritage List,

4. (…):

a) The States Parties co-authors of a transboundary or transnational serial nomination can choose, amongst themselves and with a common understanding, the State Party which will be bearing this nomination; and

b) This nomination can be registered exclusively within the ceiling of the bearing State Party."

Theme:  2.7.2 - Transboundary and transnational properties
Decision:  29 COM 18A

2 - Policies Regarding CREDIBILITY of the World Heritage List

2.7 - Types of World Heritage properties

Paragraph 137

“Serial properties will include two or more component parts related by clearly defined links:

a) Component parts should reflect cultural, social or functional links over time that provide, where relevant, landscape, ecological, evolutionary or habitat connectivity.

b) Each component part should contribute to the Outstanding Universal Value of the property as a whole in a substantial, scientific, readily defined and discernible way, and may include, inter alia, intangible attributes. The resulting Outstanding Universal Value should be easily understood and communicated.

c) Consistently, and in order to avoid an excessive fragmentation of component parts, the process of nomination of the property, including the selection of the component parts, should take fully into account the overall manageability and coherence of the property (see paragraph 114).

and provided it is the series as a whole – and not necessarily the individual parts of it – which are of Outstanding Universal Value.”

Theme:  2.7.3 - Serial properties
Source:  OG Operational Guidelines for the Implementation of the World Heritage Convention (WHC.19/01 - 10 July 2019)

2 - Policies Regarding CREDIBILITY of the World Heritage List

2.7 - Types of World Heritage properties

Paragraph 138

“A serial nominated property may occur:

a) on the territory of a single State Party (serial national property); or

b) within the territory of different States Parties, which need not be contiguous and is nominated with the consent of all States Parties concerned (serial transnational property).”

Theme:  2.7.3 - Serial properties
Source:  OG Operational Guidelines for the Implementation of the World Heritage Convention (WHC.19/01 - 10 July 2019)

2 - Policies Regarding CREDIBILITY of the World Heritage List

2.7 - Types of World Heritage properties

Paragraph 139

“Serial nominations, whether from one State Party or multiple States, may be submitted for evaluation over several nomination cycles, provided that the first property nominated is of Outstanding Universal Value in its own right. States Parties planning serial nominations phased over several nomination cycles are encouraged to inform the Committee of their intention in order to ensure better planning.”

Theme:  2.7.3 - Serial properties
Source:  OG Operational Guidelines for the Implementation of the World Heritage Convention (WHC.19/01 - 10 July 2019)

2 - Policies Regarding CREDIBILITY of the World Heritage List

2.7 - Types of World Heritage properties

35. (i) “States Parties may propose in one single nomination several individual cultural properties, which may be in different geographical locations but which should:

- be linked because they belong to the same historic-cultural group, or

- be the subject of a single safeguarding project, or

- belong to the same type of property characteristic of the zone

(…)

Each State Party submits only the cultural properties situated on its territory (even if these properties belong to an ensemble which goes beyond its borders) but it may come to an agreement with another State Party in order to make a joint submission”.

Theme:  2.7.3 - Serial properties
Decision:  3 COM XI.35
 1 2 3  See All
45
Extracts
3
Case laws
8
Decisions
0
Documents